Twister T2 Trimmer (Trim Saver Version)
- Upgraded Trim Saver Configuration that diverts and saves your trimmed sugarleaf and kief for use!
- Twister's T2 was designed from the ground up to pass any safety inspection right out of the box
- Engineered with a 304 SS tumbler, Nitrided steel blades, e-stop, interlocked tumbler gaurd, and fully enclosed end guards
- Watertight electrical components and motor make clean up easy allowing for high-pressure water to be used.
Twister designed the T2 to output high quality machine-trim at large and commercial-size operations. The T2 can be fed up to 35 lbs/hr wet or 11lbs/hr dry of bucked material ready to be trimmed. With the ability to be easily connected to 3 other T2 trimmers inline, Twister rates the T2 able to be fed 160 lbs/hr of wet material! The tumbler is made of 304 stanless steel to help mitigate any possible contamination and the Nitride steel blades prevent build-up. The motor and electrical components on the T2 are water tight, making it easy to clean with a pressure washer. Moving the trimmer around is easy no matter inside or out with the standard rugged wheels it comes with. This version comes with Twister's Trim Saver that simultaneously creates the vacuum necessary to give your flower a close cut, while seperating your trim into another bag for your use in other products!
Product Number:02-10006B, 23-0200-01-P
Input Voltage: 120V, 60Hz, Blower Voltage: 240VAC, single phase
Current Draw: 15.5A
Blade Motor: 1HP, 750W
Blade Speed: 1750 RPM
Tumbler Motor: 1/30 HP, 25W
Tumbler Speed: 75 RPM
Tumbler Diameter: 6in / 10.1cm
Cut Height: .040in / 1mm
Tumbler Slots: 50 x .25” / 0.3cm
Weight: 215lbs / 97.5kg
Shipping Weight (w/ T2-LC): 420lbs / 190kg
Length: 42.5in / 107.9cm
Width: 27.5in / 69.9cm
Height: 32.5in / 82cm
Circuit Breaker: 20A / 120V
Required Connector (plug): NEMA 5-20P
Certifications: CSA Special Inspection