CenturionPro HP3 Bucker
- Triple-station bucking machine wtih variable speed control to process wet or dry plants
- Roller design captures stalks up to 3/4" in dia. to pull and pop flowers off of the stem
- 5 different sized inputs allow for correct stem sizing to ensure no flower is lost durng bucking process
- Comes standard with 2 year manufacturer's warranty
CenturionPro has created the HP3 to triple the throughput of its already powerful HP1.
Anyone who has ever had to buck cannabis in bulk knows that mechanical buckers are worth their weight in gold. They never slow down, change pulling pressure that gives uneven buck to your harvest, and can be fed as fast as you can feed it. Bucking is an essential part of cannabis harvesting and CenturionPro offers its HP3 to take on that duty for your operation. The HP3 uses 3, 3/4HP low speed, high torque motor to move a compressed set of rollers behind the feed plate. When a straight run of cannabis stem is fed through one of its multi-sized feed holes (3/16”, 1/4”, 3/8”, 1/2", 3/4"), the plate strips the flower and bio evenly dropping it into a bin in front of the user. The stem is them ejected out the back of the HP1 where it can be disposed of after the session or used for another part of your process.
Only buck and trim dry? No problem, The HP3 come standard with speed control for the rollers so you can speed them up to get through the freshest cannabis or slowed down to ensure that your delicate and dried flower do not get damaged during bucking. Cleaning is simple as well and is recommended to be done after every session with minimal tools for cleaning the inside mechanical area of the HP1 and its rollers.
CenturionPro’s HP3 come standard with a stand and industrial casters for use in a facility. If you like to during harvest do all of your bucking outside or in the field, no problem, CenturionPro also offers an Off-Road Wheel Upgrade that will handle uneven terrain. Please ask for that in your request. The HP3 come standard from the factory with a 3-year warranty so you can rest assured that the HP3 will be a member of your team for many harvests to come.
Input Voltage: NA: 120V, 60Hz, Single Phase | EU, AUS: 240V, 50Hz, Single Phase
Current Draw: < 7.5A Operating
Dimensions: 85″ L x 32″ W x 51″ H
Drive Motor: 0.75 hp, IP54 (x3) | 1690 RPM (x3)
Circuit Breaker Required: NA: 20A/120V | EU, AUS: 20A/220V
Human Worker Replacement: 15-21 people
Feed Throughput: Wet: 500+ lbs/hr | Dry: 100+ lbs/hr
Feed Entry Sizes: 5-Hole (3/16”, 1/4”, 3/8”, 1/2", 3/4")
Feed Type: Wet/Dry
Roller Sets: Neoprene Rubber
Variable Speed: Yes
Motor Pulse: Yes
Reverse Operation: Yes
Duty Cycle: Continuous
Pull Speed: 10-30 in/s (x3)
Pull Strength: > 400 lbs (x3)
Primary Materials: 304 Stainless Steel / Aluminum
Warranty: 2 years